November 25th, 2009Tanning Lamps
There are a number of tanning bed lamps in every sun bed on the market. When you are getting a new, or especially a used or older suntan bed, make a good examination of the lamps. Ensure that they are proper tanning bulbs and comply with the FDA guidelines with regard to health and safety. You should also consider how difficult it is to get at the bulbs. Make sure that the bulbs are not difficult to change when the time comes. It is quite important, and a lot cheaper, if you can perform such routine maintenance yourself, if you buy a home tanning bed.
There are two very different, non-interchangeable sorts of bulbs used in low pressure and high pressure beds. You need to ensure you get the right sun bed lamps for your sun bed, because you cannot use just any bulb you like. If you are buying replacement bulbs on the Internet, check the make and model of your existing bed very carefully, because you have to ensure that the bulbs you are ordering are made for your bed.
High Pressure Tanning Bulbs: high pressure beds have quartz-tube lamps in a multitude of sizes. The gases used in these bulbs are pressurized to slightly higher than atmospheric pressure. The bulbs in these beds are located in the hood of the bed, so that you tan only from above. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these devices is a great deal more comfortable than a regular tanning bed.
One of the biggest advantage of these HP lamps is the amount of time you have to spend on the tanning bed. Because you tan faster, you need to spend less time in the tanning salon, which means it works out cheaper. You can achieve the depth of tan you want in about three weeks of three to five sessions each week. However, with a conventional bed, it would take you at least a month to achieve the same level of colour. Maintaining your tan is a lot easier too. You only need two or three sessions a month to maintain the colour, as opposed to four times that many visits to a conventional salon bed. Many of these bulbs produce UVA rays only, not UVB rays which are responsible for sunburn.
Conventional Sun Bed Bulbs: Conventional, or low pressure beds use long tube lamps that look like household fluorescent tubes. The lamps are situated above and below the bed of the sun bed, which means that all areas are tanned at the same time, without the need to change positions during the session.
Conventional beds use UVA and UVB rays in varying mixes. Some use both rays and others emit mostly UVA with some UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that cause sun burn when you are outside in the sun. It is very important to discover which sort of rays your tan bed’s bulbs emit. You must ensure you replace your existing bulbs with lamps of the same specifications after about 1,000 hours of use.
Another factor when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions are better for each type of bed. The staff at your tanning salon can help you choose a lotion that will work for the bed you are using and your skin type. Regardless of the bed you are using, you should certainly always use a lotion. Lotions help you tan more quickly and moisturise your skin at the same time.
Do you need to discover more about tanning bed bulbs? If so, just go over to our web site on tanning bed bulbs You can get a unique content version of this article from the Uber Article Directory.